2x cage nut license plate mounting bumper Porsche 914
Drainage hose fan housing Porsche 914
This drainage hose fan housing is supplied as one piece of 850 mm (easy to customize yourself).
needed:
- 1 piece of 75 mm (number 6 in the drawing)
- 1 piece of 330 mm (number 7 in the drawing)
- 1 piece of 400 mm (number 9 in the drawing)
CAUTION:
This hose approximates the original hose in appearance but is just not exactly the same !
See the attached photos for clarification, in which the original hose clamp is also placed over this hose.
Até master brake cylinder Porsche 911 912 914
Original Até master cylinder for dual-circuit brake system type "19mm"
we deliver this original Até master cylinder including brake pressure indicator, hexagon nuts, spring washers
- master cylinder no. 43 in the drawing similar to 91135501202
- brake pressure indicator nr 44 in the drawing similar to 90161311500
- o-ring no 45 in the drawing similar to 99970134340
- hexagon nut M8 yellow passivated no 18 in the drawing similar to 90007602502
- spring washer M8 yellow passivated nr 17 in the drawing similar to 90002701502
Applied from 1968 onwards on various models
Can also be used as an upgrade on older models or for example as an upgrade on the Porsche 914 where you then go from the standard 17mm to 19mm master cylinder.
NOTE: this is an original Até master cylinder so no imitation !
Ignition switch Porsche 914
delrin dust cap brake caliper rear Porsche 914
flexible air hose "hot / fresh" air system 520mm long
flexible air hose "hot / fresh" air system 240 mm long
This special flexible hot air hose is used for the cold/heat air fan system
Aluminum inner jacket
Diameter is 60 mm inside (65 mm outside)
This particular product number has a length of 240mm and is used in the Porsche 914
similar to number: 91457112310 (number 15 in the drawing)
Also available in different lengths for Porsche 911 / 912 (ask if you need different lengths).
Allen bolts drive shaft Porsche 911 / 912 / 914
Allen bolts drive shaft Porsche 911 / 912 / 914
M8x45 cylinder head with hexagonal socket quality 12.9
Sold in sets of 8.
4 pieces needed per flange, 16 pieces needed to mount both driveshafts to gearbox and wheel hubs.
Similar to number N0147152 (in the drawing number 11 of the 911/912 wishbone).
Similar to number 893407237 (in the drawing number 31 of the 914 wishbone).
CAUTION:
- Always compare with the old bolts due to the application of various types of drive shafts.
- This type has a hexagonal head. There are also versions with torx head, for example.
Bulb fitting dashboard clocks
Mounting kit stabilizer bar arm
